! Copyright (c) 2019 Seyfettin Bilgi ! Copyright (c) 2019-2020 Kannan Masilamani ! Copyright (c) 2019-2020 Peter Vitt ! ! Redistribution and use in source and binary forms, with or without ! modification, are permitted provided that the following conditions are met: ! ! 1. Redistributions of source code must retain the above copyright notice, ! this list of conditions and the following disclaimer. ! ! 2. Redistributions in binary form must reproduce the above copyright notice, ! this list of conditions and the following disclaimer in the documentation ! and/or other materials provided with the distribution. ! ! THIS SOFTWARE IS PROVIDED BY THE UNIVERSITY OF SIEGEN “AS IS” AND ANY EXPRESS ! OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ! OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ! IN NO EVENT SHALL UNIVERSITY OF SIEGEN OR CONTRIBUTORS BE LIABLE FOR ANY ! DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ! (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ! LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ! ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ! (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ! SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ! ****************************************************************************** ! !> author: seyfettin bilgi !! This module provides the MUSUBI specific functions for calculating !! macroscopic quantities from the state variables. !! The depending common interface between MUSUBI and ATELES is defined in the !! tem_derived_module. The functionality for accessing a variable from the state !! and evaluating a lua function are also provided in the tem_derived module. !! A Novel lattice boltzmann model for nernstPlanck equation !! author> Zhenhua Chai , Baochang Shi !! A Coupled Lattice Boltzmann method to solve Nernst -Planck Model for !! simulating Electro-Osmotic Flows ! Copyright (c) 2011-2013 Manuel Hasert ! Copyright (c) 2011 Harald Klimach ! Copyright (c) 2011 Konstantin Kleinheinz ! Copyright (c) 2011-2012 Simon Zimny ! Copyright (c) 2012, 2014-2016 Jiaxing Qi ! Copyright (c) 2012 Kartik Jain ! Copyright (c) 2013-2015, 2019 Kannan Masilamani ! Copyright (c) 2016 Tobias Schneider ! ! Redistribution and use in source and binary forms, with or without ! modification, are permitted provided that the following conditions are met: ! ! 1. Redistributions of source code must retain the above copyright notice, ! this list of conditions and the following disclaimer. ! ! 2. Redistributions in binary form must reproduce the above copyright notice, ! this list of conditions and the following disclaimer in the documentation ! and/or other materials provided with the distribution. ! ! THIS SOFTWARE IS PROVIDED BY THE UNIVERSITY OF SIEGEN “AS IS” AND ANY EXPRESS ! OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ! OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ! IN NO EVENT SHALL UNIVERSITY OF SIEGEN OR CONTRIBUTORS BE LIABLE FOR ANY ! DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ! (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ! LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ! ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ! (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ! SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ! Copyright (c) 2013 Harald Klimach ! Copyright (c) 2013-2014 Nikhil Anand ! Copyright (c) 2014, 2016 Kannan Masilamani ! Copyright (c) 2015, 2018, 2020 Peter Vitt ! Copyright (c) 2016 Verena Krupp ! Copyright (c) 2016 Tobias Schneider ! ! Redistribution and use in source and binary forms, with or without ! modification, are permitted provided that the following conditions are met: ! ! 1. Redistributions of source code must retain the above copyright notice, this ! list of conditions and the following disclaimer. ! ! 2. Redistributions in binary form must reproduce the above copyright notice, ! this list of conditions and the following disclaimer in the documentation ! and/or other materials provided with the distribution. ! ! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ! DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE ! FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ! DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ! SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ! CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, ! OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ! OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. !-------------------------------------------- ! A O S - Array of structures layout new !------------------------------------------- ! Access to get_point value output ! Access to get_element value output module mus_derQuanNernstPlanck_module use iso_c_binding, only: c_loc, c_ptr, c_f_pointer ! include treelm modules use env_module, only: rk, long_k, globalMaxLevels, labelLen use tem_param_module, only: div1_2, div1_3, div1_54, div1_9, div3_4, & & sqrt3, cs2inv, cs2, t2cs2inv, t2cs4inv, & & cs4inv use tem_aux_module, only: tem_abort use tem_varSys_module, only: tem_varSys_type, tem_varSys_op_type, & & tem_varSys_append_derVar, & & tem_varSys_proc_point, & & tem_varSys_proc_element, & & tem_varSys_proc_setParams, & & tem_varSys_proc_getParams, & & tem_varSys_proc_setupIndices, & & tem_varSys_proc_getValOfIndex use tem_variable_module, only: tem_variable_type use tem_stencil_module, only: tem_stencilHeader_type use tem_logging_module, only: logUnit use tem_topology_module, only: tem_levelOf use tem_time_module, only: tem_time_type use treelmesh_module, only: treelmesh_type use tem_debug_module, only: dbgUnit use tem_operation_var_module, only: tem_opVar_setupIndices, & & tem_get_new_varSys_data_ptr, & & tem_evalAdd_forElement, & & tem_evalAdd_fromIndex, & & tem_opVar_setParams, & & tem_opVar_getParams use tem_grow_array_module, only: grw_labelarray_type, append ! include musubi modules use mus_source_type_module, only: mus_source_op_type use mus_scheme_header_module, only: mus_scheme_header_type use mus_scheme_layout_module, only: mus_scheme_layout_type use mus_varSys_module, only: mus_varSys_data_type, & & mus_varSys_solverData_type, & & mus_get_new_solver_ptr, & & mus_deriveVar_ForPoint, & & mus_generic_varFromPDF_fromIndex, & & mus_generic_fromPDF_forElement, & & mus_derive_fromPDF use mus_scheme_type_module, only: mus_scheme_type use mus_field_prop_module, only: mus_field_prop_type use mus_operation_var_module, only: mus_opVar_setupIndices use mus_derVarPos_module, only: mus_derVarPos_type use mus_physics_module, only: mus_convertFac_type, & & gasConst_R, faraday ! include aotus modules use aotus_module, only: flu_State implicit none private !KM! public :: mus_append_derVar_nernstPlanck public :: deriveAuxNP_fromState public :: deriveEquilNP_fromAux public :: mus_deriveMoleDensity public :: deriveMoleDensity_forElement public :: deriveMoleDensity_fromIndex !! public :: deriveSrc_electricField public :: applySrc_electricFieldNP contains ! **************************************************************************** ! !> subroutine to add derive variables for weakly compressible PB !! (schemekind = 'nernstPlanck') to the varsys. !! A Coupled Lattice Boltzmann Method to Solve Nernst-Planck Model !! for Simulating Electro-Osmotic flows !! author> Xuguang yang !KM! \todo currently this is replaced by mus_append_derMixVar_MS since !KM! only mixture variable is appended in this routine !KM! subroutine mus_append_derVar_nernstPlanck( varSys, solverData, fldLabel, & !KM! & nFields, derVarName ) !KM! ! --------------------------------------------------------------------------- !KM! !> global variable system !KM! type(tem_varSys_type), intent(inout) :: varSys !KM! !KM! !> Contains pointer to solver data types !KM! type(mus_varSys_solverData_type), target, intent(in) :: solverData !KM! !KM! !> number of fields !KM! integer, intent(in) :: nFields !KM! !KM! !> array of field label prefix. Size=nFields !KM! character(len=*), intent(in) :: fldLabel(:) !KM! !KM! !> array of derive physical variables !KM! type(grw_labelarray_type), intent(inout) :: derVarName !KM! ! --------------------------------------------------------------------------- !KM! ! number of derive variables !KM! integer :: iVar, nComponents, addedPos, iField !KM! logical :: wasAdded !KM! character(len=labelLen), allocatable :: input_varname(:) !KM! character(len=labelLen) :: varName !KM! procedure(tem_varSys_proc_point), pointer :: get_point => NULL() !KM! procedure(tem_varSys_proc_element), pointer :: get_element => NULL() !KM! procedure(tem_varSys_proc_setParams), pointer :: set_params => null() !KM! procedure(tem_varSys_proc_getParams), pointer :: get_params => null() !KM! procedure(tem_varSys_proc_setupIndices), pointer :: & !KM! & setup_indices => null() !KM! procedure(tem_varSys_proc_getValOfIndex), pointer :: & !KM! & get_valOfIndex => null() !KM! type(c_ptr) :: method_data !KM! character(len=labelLen) :: derVarName_loc !KM! ! --------------------------------------------------------------------------- !KM! nullify(get_point, get_element, set_params, get_params, setup_indices, & !KM! & get_valOfIndex) !KM! !KM! derVarName_loc = 'mole_density' !KM! ! mole_density of each field is already added as auxiliary variable !KM! ! so only add mole_density for mixture !KM! !KM! ! set pointers for mixture. mixture quantity is obtained by summing up !KM! ! species quantities !KM! get_element => tem_evalAdd_forElement !KM! get_point => mus_deriveVar_ForPoint !KM! setup_indices => tem_opVar_setupIndices !KM! get_valOfIndex => tem_evalAdd_fromIndex !KM! method_data = tem_get_new_varSys_data_ptr(method_data) !KM! set_params => tem_opVar_setParams !KM! get_params => tem_opVar_getParams !KM! !KM! nComponents = 1 !KM! varname = trim(adjustl(derVarName_loc)) !KM! allocate(input_varname(nFields)) !KM! do iField = 1, nFields !KM! input_varname(iField) = trim(fldLabel(iField))//trim(varname) !KM! end do !KM! !KM! ! append variable to varSys !KM! call tem_varSys_append_derVar( me = varSys, & !KM! & varName = trim(varname), & !KM! & nComponents = nComponents, & !KM! & input_varname = input_varname, & !KM! & method_data = method_data, & !KM! & get_point = get_point, & !KM! & get_element = get_element, & !KM! & set_params = set_params, & !KM! & get_params = get_params, & !KM! & setup_indices = setup_indices, & !KM! & get_valOfIndex = get_valOfIndex, & !KM! & pos = addedPos, & !KM! & wasAdded = wasAdded ) !KM! !KM! if (wasAdded) then !KM! write(logUnit(10),*) ' Appended variable:'//trim(varname) !KM! else if (addedpos < 1) then !KM! write(logUnit(1),*) 'Error: variable '//trim(varname)// & !KM! & ' is not added to variable system' !KM! end if !KM! !KM! deallocate(input_varname) !KM! !KM! end subroutine mus_append_derVar_nernstPlanck ! ************************************************************************** ! ! **************************************************************************** ! !> This routine computes auxField 'mole_density' from state array !! !! This subroutine's interface must match the abstract interface definition !! [[derive_auxFromState]] in derived/[[mus_derVarPos_module]].f90 in order to !! be callable via [[mus_derVarPos_type:auxFieldFromState]] function pointer. subroutine deriveAuxNP_fromState( derVarPos, state, neigh, iField, nElems, & & nSize, iLevel, stencil, varSys, auxField ) ! -------------------------------------------------------------------- ! !> Position of derive variable in variable system class(mus_derVarPos_type), intent(in) :: derVarPos !> Array of state !! n * layout%stencil(1)%QQ * nFields real(kind=rk), intent(in) :: state(:) !> connectivity vector integer, intent(in) :: neigh(:) !> Current field integer, intent(in) :: iField !> number of elements integer, intent(in) :: nElems !> number of elements in state array integer, intent(in) :: nSize !> current level integer, intent(in) :: iLevel !> stencil header contains discrete velocity vectors type(tem_stencilHeader_type), intent(in) :: stencil !> variable system which is required to access fieldProp !! information via variable method data c_ptr type(tem_varSys_type), intent(in) :: varSys !> Output of this routine !! Size: nElems*nAuxScalars real(kind=rk), intent(inout) :: auxField(:) ! -------------------------------------------------------------------- ! integer :: iElem, iDir real(kind=rk) :: pdf( stencil%QQ ) ! ------------------------------------------------------------------------ ! !NEC$ ivdep do iElem = 1, nElems !NEC$ shortloop do iDir = 1, stencil%QQ pdf(iDir) = state( & & ( ielem-1)* varsys%nscalars+idir+( 1-1)* stencil%qq) end do ! element offset is not required because passive scalar has only ! one aux scalar ! density auxField(iElem) = sum(pdf) end do end subroutine deriveAuxNP_fromState ! **************************************************************************** ! ! ************************************************************************** ! !> This routine computes equilbrium from auxField !! !! This subroutine's interface must match the abstract interface definition !! [[derive_equilFromAux]] in derived/[[mus_derVarPos_module]].f90 in order to !! be callable via [[mus_derVarPos_type:equilFromAux]] function pointer. subroutine deriveEquilNP_fromAux( derVarPos, auxField, iField, nElems, & & varSys, layout, fEq ) ! -------------------------------------------------------------------- ! !> Position of derive variable in variable system class(mus_derVarPos_type), intent(in) :: derVarPos !> Array of auxField. !! Single species: dens_1, vel_1, dens_2, vel_2, .. dens_n, vel_n !! multi-species: dens_1_sp1, vel_1_spc1, dens_1_sp2, vel_1_spc2, !! dens_2_sp1, vel_2_spc2, dens_2_sp2, vel_2_spc2 ... !! dens_n_sp1, vel_n_sp1, dens_n_sp2, vel_n_spc2 !! Access: (iElem-1)*nAuxScalars + auxField_varPos real(kind=rk), intent(in) :: auxField(:) !> Current field integer, intent(in) :: iField !> number of elements integer, intent(in) :: nElems !> variable system which is required to access fieldProp !! information via variable method data c_ptr type(tem_varSys_type), intent(in) :: varSys !> scheme layout contains stencil definition and lattice weights type(mus_scheme_layout_type), intent(in) :: layout !> Output of this routine !! Dimension: n*QQ of res real(kind=rk), intent(out) :: fEq(:) ! -------------------------------------------------------------------- ! !KM: \todo add transport velocity as auxField write(logUnit(1),*) 'ERROR: Equilibrium calculation requires transport ' write(logUnit(1),*) 'velocity and it is not provided to this routine' write(logUnit(1),*) 'Solution: use deriveEquilPS_fromMacro' call tem_abort() end subroutine deriveEquilNP_fromAux ! ************************************************************************** ! ! ************************************************************************** ! !> Calculate the potential of a given set of pdfs of elements !! !! The interface has to comply to the abstract interface !! [[mus_varSys_module:mus_derive_fromPDF]]. !! recursive subroutine mus_deriveMoleDensity(fun, varsys, stencil, iLevel, & & posInState, pdf, res, nVals ) !> description of the method to obtain the variables, here some preset !! values might be stored, like the space time function to use or the !! required variables. class(tem_varsys_op_type), intent(in) :: fun !> the variable system to obtain the variable from. type(tem_varsys_type), intent(in) :: varsys !> fluid stencil defintion type(tem_stencilHeader_type), intent(in) :: stencil !> current Level integer, intent(in) :: iLevel !> Position of element in levelwise state array integer, intent(in) :: posInState(:) !> pdf array real(kind=rk), intent(in) :: pdf(:) !> results real(kind=rk), intent(out) :: res(:) !> nVals to get integer, intent(in) :: nVals ! --------------------------------------------------------------------------- integer :: iVal integer :: nCompPDF ! --------------------------------------------------------------------------- nCompPDF = varSys%method%val(fun%input_varPos(1))%nComponents res = 0.0_rk do iVal = 1, nVals res(iVal) = sum( pdf( (iVal-1)*nCompPDF + 1: iVal*nCompPDF) ) end do !iVal end subroutine mus_deriveMoleDensity ! ****************************************************************************** ! ! ************************************************************************** ! !> Calculate the potential of a given set of elements (sum up all links). !! This routine is used to compute potential for all scheme kinds !! !! The interface has to comply to the abstract interface !! [[tem_varSys_module:tem_varSys_proc_element]]. !! recursive subroutine deriveMoleDensity_forElement(fun, varsys, elempos, & & time, tree, nElems, nDofs, & & res ) ! -------------------------------------------------------------------- ! !> Description of the method to obtain the variables, here some preset !! values might be stored, like the space time function to use or the !! required variables. class(tem_varSys_op_type), intent(in) :: fun !> The variable system to obtain the variable from. type(tem_varSys_type), intent(in) :: varSys !> Position of the TreeID of the element to get the variable for in the !! global treeID list. integer, intent(in) :: elempos(:) !> Point in time at which to evaluate the variable. type(tem_time_type), intent(in) :: time !> global treelm mesh info type(treelmesh_type), intent(in) :: tree !> Number of values to obtain for this variable (vectorized access). integer, intent(in) :: nElems !> Number of degrees of freedom within an element. integer, intent(in) :: nDofs !> Resulting values for the requested variable. !! !! Linearized array dimension: !! (n requested entries) x (nComponents of this variable) !! x (nDegrees of freedom) !! Access: (iElem-1)*fun%nComponents*nDofs + !! (iDof-1)*fun%nComponents + iComp real(kind=rk), intent(out) :: res(:) ! -------------------------------------------------------------------- ! !> Function pointer to perform specific operation. procedure(mus_derive_fromPDF), pointer :: fnCalcPtr ! -------------------------------------------------------------------- ! fnCalcPtr => mus_deriveMoleDensity call mus_generic_fromPDF_forElement( & & fun = fun, & & varSys = varSys, & & elempos = elempos, & & tree = tree, & & time = time, & & nVals = nElems, & & fnCalcPtr = fnCalcPtr, & & nDofs = nDofs, & & res = res ) end subroutine deriveMoleDensity_forElement ! ************************************************************************** ! ! ************************************************************************** ! !> Calculate the potential of a given set of elements (sum up all links). !! This routine is used to compute potential for all scheme kinds !! !! The interface has to comply to the abstract interface !! [[tem_varSys_module:tem_varSys_proc_getValofIndex]]. !! recursive subroutine deriveMoleDensity_fromIndex(fun, varSys, time, iLevel, & & idx, idxLen, nVals, res ) ! -------------------------------------------------------------------- ! !> Description of the method to obtain the variables, here some preset !! values might be stored, like the space time function to use or the !! required variables. class(tem_varSys_op_type), intent(in) :: fun !> The variable system to obtain the variable from. type(tem_varSys_type), intent(in) :: varSys !> Point in time at which to evaluate the variable. type(tem_time_type), intent(in) :: time !> Level on which values are requested integer, intent(in) :: iLevel !> Index of points in the growing array and variable val array to !! return. !! Size: nVals integer, intent(in) :: idx(:) !> With idx as start index in contiguous memory, !! idxLength defines length of each contiguous memory !! Size: nVals integer, optional, intent(in) :: idxLen(:) !> Number of values to obtain for this variable (vectorized access). integer, intent(in) :: nVals !> Resulting values for the requested variable. !! !! Dimension: n requested entries x nComponents of this variable !! Access: (iElem-1)*fun%nComponents + iComp real(kind=rk), intent(out) :: res(:) ! -------------------------------------------------------------------- ! !> Function pointer to perform specific operation. procedure(mus_derive_fromPDF), pointer :: fnCalcPtr ! -------------------------------------------------------------------- ! fnCalcPtr => mus_deriveMoleDensity call mus_generic_varFromPDF_fromIndex( & & fun = fun, & & varSys = varSys, & & time = time, & & iLevel = iLevel, & & idx = idx, & & nVals = nVals, & & fnCalcPtr = fnCalcPtr, & & res = res ) end subroutine deriveMoleDensity_fromIndex ! ************************************************************************** ! ! ****************************************************************************** ! !> Update state with source variable "electric field" !! !! $$ \S_j = \w_j*\c_j*\S $$ !! !! Where \S is the source term !! S = (D*w/cs^2)*(z_i*F/(R*T))*n_i.E !! Simuilar to derive routine but it updates the state whereas derive !! is used for tracking. !! !! This subroutine's interface must match the abstract interface definition !! [[proc_apply_source]] in derived/[[mus_source_type_module]].f90 in order to !! be callable via [[mus_source_op_type:applySrc]] function pointer. subroutine applySrc_electricFieldNP( fun, inState, outState, neigh, & & auxField, nPdfSize, iLevel, varSys, & & time, phyConvFac, derVarPos ) ! -------------------------------------------------------------------- ! !> Description of method to apply source terms class(mus_source_op_type), intent(in) :: fun !> input pdf vector real(kind=rk), intent(in) :: inState(:) !> output pdf vector real(kind=rk), intent(inout) :: outState(:) !> connectivity Array corresponding to state vector integer,intent(in) :: neigh(:) !> auxField array real(kind=rk), intent(in) :: auxField(:) !> number of elements in state Array integer, intent(in) :: nPdfSize !> current level integer, intent(in) :: iLevel !> variable system type(tem_varSys_type), intent(in) :: varSys !> Point in time at which to evaluate the variable. type(tem_time_type), intent(in) :: time !> Physics conversion factor for current level type(mus_convertFac_type), intent(in) :: phyConvFac !> position of derived quantities in varsys type(mus_derVarPos_type), intent(in) :: derVarPos(:) ! -------------------------------------------------------------------- ! type(mus_varSys_data_type), pointer :: fPtr real(kind=rk) :: electricField(fun%elemLvl(iLevel)%nElems*3) real(kind=rk) :: EF_elem(3) integer :: iElem, nElems, iDir, posInTotal, elemOff integer :: iField, nFields, depField, nScalars, QQ, nInputStates !number density of nSpecies real(kind=rk) :: num_dens( varSys%nStateVars ) real(kind=rk) :: gasConstLB real(kind=rk), dimension(3, varSys%nStateVars ) :: electricTerm real(kind=rk), dimension(varSys%nStateVars) :: omega_fac real(kind=rk) :: force_fac, faradayLB real(kind=rk) :: forceTerm ! -------------------------------------------------------------------- ! !write(dbgUnit(1),*) 'source variable: ', trim(varSys%varname%val(fun%srcTerm_varPos)) ! convert c pointer to solver type fortran pointer call c_f_pointer( varSys%method%val( fun%srcTerm_varPos )%method_data, & & fPtr ) ! Number of elements to apply source terms nElems = fun%elemLvl(iLevel)%nElems associate( scheme => fPtr%solverData%scheme, & & auxField => fPtr%solverData%scheme%auxField, & & nernstPlanck => fPtr%solverData%scheme%nernstPlanck, & & physics => fPtr%solverData%physics, & & species => fPtr%solverData%scheme%field(:)%fieldProp%species ) ! Get electrical force which is refered in config file either its ! spacetime variable or operation variable call varSys%method%val(fun%data_varPos)%get_valOfIndex( & & varSys = varSys, & & time = time, & & iLevel = iLevel, & & idx = fun%elemLvl(iLevel)%idx(1:nElems), & & nVals = nElems, & & res = electricField ) ! convert physical to lattice electricField = electricField * physics%coulomb0 & & / physics%fac(iLevel)%force ! number of pdf states this source depends on ! last input is spacetime function so it is neglected nInputStates = varSys%method%val(fun%srcTerm_varPos)%nInputs - 1 ! constant parameter nFields = scheme%nFields QQ = scheme%layout%fStencil%QQ nScalars = varSys%nScalars gasConstLB = gasConst_R / physics%fac(iLevel)%gasConst faradayLB = faraday / physics%fac(iLevel)%faraday ! factor to multiply force Term force_fac = faradayLB / ( gasConstLB * nernstPlanck%temp ) ! omega factor for each species do iField = 1, nFields omega_fac(iField) = (1.0_rk - species(iField)%omega*0.5_rk) end do !write(*,*) 'force_fac ', force_fac ! update source for each element do iElem = 1, nElems posInTotal = fun%elemLvl(iLevel)%posInTotal(iElem) ! element offset for auxField elemoff = (posInTotal-1)*varSys%nAuxScalars ! Get number density from auxField do iField = 1, nFields num_dens(iField) = auxField(iLevel)%val( elemOff + iField ) end do ! convert physical to lattice EF_elem = electricField((iElem-1)*3+1 : iElem*3) ! S = (1-omega_i/2)*(z_i*F/(R*T))*n_i.E do iField = 1, nFields electricTerm(:, iField) = force_fac * omega_fac(iField) & & * species(iField)%chargeNr & & * num_dens(iField) * EF_elem(:) end do !write(*,*) 'electricTerm ', electricTerm do iField = 1, nInputStates depField = varSys%method%val(fun%srcTerm_varPos)%input_varPos(iField) do iDir = 1, QQ ! Force on each species ! d^m_k = weight_m*cxDir_m ( S ) forceTerm = scheme%layout%fStencil%cxDirRK( 1, iDir ) & & * electricTerm(1, depField) & & + scheme%layout%fStencil%cxDirRK( 2, iDir ) & & * electricTerm(2, depField) & & + scheme%layout%fStencil%cxDirRK( 3, iDir ) & & * electricTerm(3, depField) outState( & & (posintotal-1)*nscalars+idir+(depfield-1)*qq ) & & = outState( & & (posintotal-1)*nscalars+idir+(depfield-1)*qq ) & & + scheme%layout%weight( iDir ) * forceTerm end do ! iDir end do !iField end do !iElem end associate end subroutine applySrc_electricFieldNP ! ****************************************************************************** ! end module mus_derQuanNernstPlanck_module