! Copyright (c) 2019 Kannan Masilamani <kannan.masilamani@uni-siegen.de> ! Copyright (c) 2019 Harald Klimach <harald.klimach@uni-siegen.de> ! ! Redistribution and use in source and binary forms, with or without ! modification, are permitted provided that the following conditions are met: ! ! 1. Redistributions of source code must retain the above copyright notice, this ! list of conditions and the following disclaimer. ! ! 2. Redistributions in binary form must reproduce the above copyright notice, ! this list of conditions and the following disclaimer in the documentation ! and/or other materials provided with the distribution. ! ! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ! DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE ! FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ! DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ! SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ! CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, ! OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ! OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ! *******************************************************************************! !> summary: This module contains \ref points description and growing array !! author: Kannan Masilamani !! description for points. ! Copyright (c) 2012-2013 Simon Zimny <s.zimny@grs-sim.de> ! Copyright (c) 2012 Manuel Hasert <m.hasert@grs-sim.de> ! Copyright (c) 2012-2016 Harald Klimach <harald.klimach@uni-siegen.de> ! Copyright (c) 2012, 2015-2016 Kannan Masilamani <kannan.masilamani@uni-siegen.de> ! Copyright (c) 2013 Daniel Harlacher <d.harlacher@grs-sim.de> ! Copyright (c) 2014 Kartik Jain <kartik.jain@uni-siegen.de> ! Copyright (c) 2014 Verena Krupp <verena.krupp@uni-siegen.de> ! Copyright (c) 2015-2017 Jiaxing Qi <jiaxing.qi@uni-siegen.de> ! Copyright (c) 2015-2016 Peter Vitt <peter.vitt2@uni-siegen.de> ! Copyright (c) 2016 Daniel Fleischer <daniel.fleischer@student.uni-siegen.de> ! Copyright (c) 2016 Tobias Schneider <tobias1.schneider@student.uni-siegen.de> ! Copyright (c) 2017 Daniel PetrĂ³ <daniel.petro@student.uni-siegen.de> ! ! Parts of this file were written by Harald Klimach, Simon Zimny and Manuel ! Hasert for German Research School for Simulation Sciences GmbH. ! ! Parts of this file were written by Harald Klimach, Kannan Masilamani, ! Daniel Harlacher, Kartik Jain, Verena Krupp, Jiaxing Qi, Peter Vitt, ! Daniel Fleischer, Tobias Girresser and Daniel PetrĂ³ for University Siegen. ! ! Redistribution and use in source and binary forms, with or without ! modification, are permitted provided that the following conditions are met: ! ! 1. Redistributions of source code must retain the above copyright notice, this ! list of conditions and the following disclaimer. ! ! 2. Redistributions in binary form must reproduce the above copyright notice, ! this list of conditions and the following disclaimer in the documentation ! and/or other materials provided with the distribution. ! ! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ! DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE ! FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ! DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ! SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ! CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, ! OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ! OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ! This file contains the source code for growing and dynamic arrays. ! This is used for arrays of primitives (int, long_int, real, ...) as well as ! for arrays of derived datatypes (tem_variable_type,...). ! ! To use these macros include the following to your source file. ! ! Smart growing array (GA) for ?tstring? ! Growing Arrays: ! ! declaration ! ! ! implementation ! ! ----------------------------------------------------------------- ! 2d Array, which can grow in second dimension only (GA2d) ! tname ... indicates type of dynamic array (long, int, real, ...) ! !------------------------------------------------------------------------------ ! ! dynamic Arrays: ! ! declaration ! ! ! implementation ! module tem_point_module use env_module, only: rk, minLength, zeroLength use tem_cube_module, only: tem_cube_type use tem_logging_module, only: tem_toStr, logUnit implicit none private public :: grw_pointArray_type public :: tem_point_type public :: init, append, truncate, destroy, empty, placeAt public :: tem_pointCubeOverlap !> This type contains coordinate of a point type tem_point_type real(kind=rk) :: coord(3) !< real world coordinate of a point end type tem_point_type !> growing array type for type(tem_point_type) type grw_pointarray_type integer :: nvals = 0 integer :: containersize = 0 type(tem_point_type), allocatable :: val(:) end type !> initialize the dynamic array interface init module procedure init_ga_point end interface !> truncate the array, meaning !! cut off the trailing empty entries interface truncate module procedure truncate_ga_point end interface !> empty the entries without changing arrays interface empty module procedure empty_ga_point end interface !> destroy the dynamic array interface destroy module procedure destroy_ga_point end interface !> insert an element at a given position interface placeat module procedure placeat_ga_point module procedure placeat_ga_point_vec end interface !> append a value to the dynamic array !! and return its position. interface append module procedure append_ga_point module procedure append_ga_point_vec end interface !> increase the size of the container !! for the array. interface expand module procedure expand_ga_point end interface contains ! **************************************************************************** ! !> This function checks whether the given point is found inside given cube. !! !! Point is inside the cube only if the point is >= cube origin and !! < cube max. Point lying on the cube max is not part of the cube function tem_pointCubeOverlap(point, cube) result(overlap) ! --------------------------------------------------------------------------! !> Coordinate of the point to check for intersection. type(tem_point_type) :: point !> Cube to intersect with. type(tem_cube_type) :: cube logical :: overlap !< true if point lies inside else false ! --------------------------------------------------------------------------! logical :: dirrange(3) ! Check interval in all 3 directions. dirrange = (point%coord >= cube%origin) & & .and. (point%coord < cube%endPnt) ! Overlap depends on all 3 intervals. overlap = all(dirrange) end function tem_pointCubeOverlap ! **************************************************************************** ! subroutine init_ga_point(me, length) type(grw_pointarray_type), intent(out) :: me !< dynamic array to init integer, intent(in), optional :: length !< initial length of the container if (present(length)) then me%containersize = length else me%containersize = zerolength end if ! deallocate ... if( allocated( me%val )) & deallocate(me%val) ! ... and reallocate allocate(me%val(me%containersize)) me%nvals = 0 end subroutine init_ga_point subroutine destroy_ga_point(me) type(grw_pointarray_type), intent(inout) :: me !< dynamic array to destroy me%containersize = 0 me%nvals = 0 if( allocated( me%val ) ) deallocate(me%val) end subroutine destroy_ga_point subroutine truncate_ga_point(me) !------------------------------------------------------------------------ type(grw_pointarray_type) :: me !< array to truncate !------------------------------------------------------------------------ type(tem_point_type), allocatable :: tarray(:) !------------------------------------------------------------------------ integer :: ii !------------------------------------------------------------------------ ! nothing to do if container size is not larger than the number of values ! in the array. if (me%containersize > me%nvals) then allocate(tarray(me%nvals)) do ii = 1, me%nvals tarray(ii) = me%val(ii) end do call move_alloc(tarray, me%val) me%containersize = me%nvals end if end subroutine truncate_ga_point subroutine empty_ga_point(me) !------------------------------------------------------------------------ type(grw_pointarray_type) :: me !< array to sorttruncate !------------------------------------------------------------------------ me%nvals = 0 end subroutine empty_ga_point !> adds the value to a given position inside the growing array. !! !! if the requested position is outside the current array bounds, the array !! will be resized accordingly. if it is inside the current array bounds, the !! element at the requested position will be replaced. subroutine placeat_ga_point(me, val, pos, length) type(grw_pointarray_type) :: me !< array to place the value into type(tem_point_type), intent(in) :: val !< value to place at the given position integer, intent(in) :: pos !< predefined position !> optional length to expand the array integer, intent(in), optional :: length ! value to append is larger than all existing ones, ! just put it to the end of the list, this captures ! also the case of empty lists. ! in this case foundpos = me%nvals + 1 holds. if (pos > me%containersize) then ! expand the array, if its boundary is reached call expand(me = me, pos = pos, length = length) end if me%nvals = max( pos, me%nvals ) me%val(pos) = val end subroutine placeat_ga_point !> adds the values starting from a given position inside the growing array. !! !! if the requested position is outside the current array bounds, the array !! will be resized accordingly. if it is inside the current array bounds, the !! elements starting from the requested position will be replaced up to !! the element at position `pos + size(val) - 1`. subroutine placeat_ga_point_vec(me, val, pos, length) type(grw_pointarray_type) :: me !< array to append the value to type(tem_point_type), intent(in) :: val(:) !< values to append integer, intent(in) :: pos !< predefined position !> optional length to expand the array integer, intent(in), optional :: length integer :: ub, ii if (me%nvals == huge(me%nvals)) then write(*,*) "reached end of integer range for growing array!" write(*,*) "aborting!!" stop end if ub = pos + size(val) - 1 if (ub > me%containersize) then ! expand the array, if its boundary is reached call expand(me = me, pos = ub, length = length) end if me%nvals = max( ub, me%nvals ) do ii = pos, ub me%val(ii) = val(1+ii-pos) end do end subroutine placeat_ga_point_vec subroutine append_ga_point(me, val, length) type(grw_pointarray_type) :: me !< array to append the value to type(tem_point_type), intent(in) :: val !< value to append !> optional length to expand the array integer, intent(in), optional :: length ! value to append is larger than all existing ones, ! just put it to the end of the list, this captures ! also the case of empty lists. ! in this case foundpos = me%nvals + 1 holds. if (me%nvals+1 > me%containersize) then ! expand the array, if its boundary is reached call expand(me = me, length = length) end if me%nvals = me%nvals+1 me%val(me%nvals) = val end subroutine append_ga_point subroutine append_ga_point_vec(me, val, length) type(grw_pointarray_type) :: me !< array to append the value to type(tem_point_type), intent(in) :: val(:) !< values to append !> optional length to expand the array integer, intent(in), optional :: length integer :: lb, ub, ii if (me%nvals == huge(me%nvals)) then write(*,*) "reached end of integer range for growing array!" write(*,*) "aborting!!" stop end if lb = me%nvals + 1 ub = lb + size(val) - 1 if (ub > me%containersize) then ! expand the array, if its boundary is reached call expand(me = me, pos = ub, length = length) end if me%nvals = max( ub, me%nvals ) do ii = lb, ub me%val(ii) = val(1+ii-lb) end do end subroutine append_ga_point_vec subroutine expand_ga_point(me, pos, length) type(grw_pointarray_type) :: me !< array to resize integer, intent(in), optional :: pos !< optional predefined position !> optional length to expand the array integer, intent(in), optional :: length type(tem_point_type), allocatable :: swpval(:) integer :: explen, ii explen = 0 ! increase the container by the requested length of double it if( present(length) ) then explen = max( length, minlength ) else ! set the global minimum length, if doubling would be smaller than that explen = max(me%containersize, minlength) end if ! if a position is given, increase the container to at least the size to ! fit the position. if( present(pos) ) explen = max(explen, pos-me%containersize) ! if the current size plus explen exceeds the max container size, ! reduce the size to the max container size. if( (huge(me%containersize) - explen) <= me%containersize) then ! set max container size me%containersize = huge(me%containersize) else ! set the new container size me%containersize = me%containersize + explen end if if ( me%nvals > 0 ) then allocate(swpval(me%containersize)) do ii = 1, me%nvals swpval(ii) = me%val(ii) end do call move_alloc( swpval, me%val ) else ! me%nvals == 0 if ( allocated(me%val) ) deallocate( me%val ) allocate( me%val(me%containersize) ) end if end subroutine expand_ga_point end module tem_point_module !> \page point Points !! Points are defined in the configuration file through canonoical !! geometry kind with an origin.\n !! Valid definition: !! \li Single point !! \verbatim !! geometry = { !! kind = 'canoND', !! object = { !! origin = { 0.0,0.0,0.0 } !! } !! } !! \endverbatim !! \li Multiple point !! \verbatim !! geometry = { !! kind = 'canoND', !! object = { !! { !! origin = { 0.0,0.0,0.0 } !! }, !! { !! origin = { 1.0,0.0,0.0 } !! }, !! } !! } !! \endverbatim !!\n\n !! Seeder file to generate the mesh with multiple point obstacle is given below: !! \include testsuite/point/seeder.lua !! \n\n !! The image generated with multiple point obstacles from the above code: !! \image html tem_point.png !! Example lua file is available at \link testsuite/point/seeder.lua !! \example testsuite/point/seeder.lua